Product
- KAIFU Bearings
- Kaifu Linear ball bearing
- KAIFU Deep Groove Ball Bearing
- KAIFU Eccentric Bearing
- KAIFU Spherical Roller Bearing
- KAIFU Rod End Bearing
- KAIFU Cylindrical Roller Bearing
- KAIFU Tapered Roller Bearings
- KAIFU Needle Roller Bearings
- KAIFU Self-Aligning Ball Bearings
- KAIFU Angular Contact Ball Bearings
- KAIFU Spherical Plain Bearings
- KAIFU Thrust Ball Bearings
- NACHI Bearings
- NSK Bearings
- NTN Bearings
- TIMKEN Bearings
- FAG/INA Bearings
prev
next
TIMKEN 180TVL605
Description:
d(mm):457.2
D(mm):625.475
T(mm):92.075
weight(kg):78.4
- Product Details
- Make an Inquiry
TVL Types provide exceptionally low friction, are cool running and have quiet operation when operated at high speeds. They are also less sensitive to misalignment. Consult your Timken representative for assistance in determining limits of such loading for specific applications.
Although ball thrust bearings have been designed exclusively for thrust loads, the TVL bearing will accommodate some radial loading. Consult your Timken representative for assistance in determining the limits of such loading for specific applications.
Hardened and ground steel races of TVL bearings enclose a complement of precision ground and lapped steel balls, separated by a bronze cage. Other material may be specified as required.
Not strictly an annular ball bearing, the larger ring is identified as the outer ring; the smaller as the inner. Inner ring is usually the rotating element and is shaft mounted. Outer ring is normally stationary and should be mounted with an outside diameter clearance that allows the bearing to assume a normal operating position. If combined loads are expected, the outer ring must be radially located in the housing.
TVL bearings should always be operated under thrust loading. If a constant thrust load is not normally present, it should be imposed by springs or other devices.
Although ball thrust bearings have been designed exclusively for thrust loads, the TVL bearing will accommodate some radial loading. Consult your Timken representative for assistance in determining the limits of such loading for specific applications.
Hardened and ground steel races of TVL bearings enclose a complement of precision ground and lapped steel balls, separated by a bronze cage. Other material may be specified as required.
Not strictly an annular ball bearing, the larger ring is identified as the outer ring; the smaller as the inner. Inner ring is usually the rotating element and is shaft mounted. Outer ring is normally stationary and should be mounted with an outside diameter clearance that allows the bearing to assume a normal operating position. If combined loads are expected, the outer ring must be radially located in the housing.
TVL bearings should always be operated under thrust loading. If a constant thrust load is not normally present, it should be imposed by springs or other devices.
Partners
prev
next
